Keep out

Close-up view of an insect screen.
Photo by Raymond Cloyd

Growers can take a proactive step toward reducing insect pests and install insect screening over greenhouse vent openings.

“Screening isn’t cheap, there is an initial investment. But in the long run there is a savings in the reduction of pesticide applications, cleaner plants [and a] healthier environment,” says Raymond Cloyd, an entomologist, professor and extension specialist at Kansas State University.

He adds that insect screening should be part of any IPM program and is compatible with the use of biological controls.

Insect screening can help keep out the common insects that plague a growing operation. Properly sized and fitted insect screening will also keep the beneficial insects from escaping, but more importantly it will keep flying insects out that Cloyd says “inundate the biologicals” like thrips (Thysanoptera), whiteflies (Aleyrodidae), onion or allium leafminers (Phytomyza gymnostoma Loew), and shore flies (Ephydridae).

Insect screening is particularly important in locations where greenhouses are near adjoining fields of corn, soybeans and other crops, where insects can enter the greenhouse from the fields, particularly during harvest time.

Sizing up the situation

Once a grower gets the go-ahead from procurement to invest in screening material, the next course of action is to select the right product for their greenhouse.

“The first thing I ask them to do is contact the National Greenhouse Manufacturers Association,” Cloyd says. “This association has guidelines on how to install this screening; you just can’t put screening on your vents, you’ll burn out your fans.”

Cloyd says he has worked with many growers in the installation stage of greenhouse screening. He says the first step in properly installing insect screens involves calculating the square footage of space needed for the cages or boxes that are installed on the exterior of the greenhouse. The cages provide adequate ventilation and cooling while preventing fan motors from burning out.

The other consideration is the size of the holes or pore spaces in the screening opening. Thrips, for example, are narrow and thin, and can squeeze through some of the smallest openings.

In his book “Greenhouse Pest Management,” Cloyd advises greenhouse operators to install the insect screening based on the smallest insect that needs to be excluded and says that a virus screen may also reduce the incidence of viral diseases, such as the impatiens necrotic spot and tomato spotted wilt viruses, both vectored by the western flower thrip.

Insect screening should be part of any IPM program and is compatible with the use of biological controls.
Photo by Raymond Cloyd, Kansas State University

Accordion screening

The folding, or accordion, system, is sold by Holland Gaas, a company in the Netherlands. Accordion screening can be installed over venlo vents, continuous vents, sidewall vents or butterfly vents outside a greenhouse.

“Insect [screening] has made a bunch of leaps from the beginning — from pest [screening] over padded end walls and cages — to the newest innovation, accordion netting,” says Julie Gilbert-Vijverberg, director of Batesville, Indiana-based G&V Greenhouse Solutions and U.S. representative for Holland Gaas.

Gilbert-Vijverbert says greenhouse owners should consult with manufacturers before installing accordion screening to find out the projected cubic feet per minute (CFM) of their fans and see if the openings need to be retrofitted with cages or boxes to maintain adequate air flow. Newer greenhouses may not need the boxes and cages. A greenhouse manufacturer or a greenhouse construction company can help configure the airflow reduction to have adequate airflow for growers’ greenhouse needs.

Accordion screening can be installed over venlo vents, continuous vents, sidewall vents or butterfly vents outside a greenhouse.
Photo courtesy of G&V Greenhouse Solutions

Maintaining your screening

Standard greenhouse screens can last from five to 10 years if it is maintained properly, Cloyd says.

“You’ve got to keep them clean because dirt and debris can build up,” he says. “I know growers who have used them for up to 10 years.”

Gilbert-Vijverberg recommends cleaning the screening once a year, especially if your houses are located near farm fields where farmers are plowing. The debris that is kicked up by the plowing clings to the screens, reducing ventilation. Gilbert-Vijverberg says growers can clean the surface of accordion screening by using a pressure washer set at 2,500 psi with a fan tip and lightly spraying from the inside out, or if thrips are your main problem, from the outside in. She says conventional greenhouse screening should be cleaned with a garden hose and spray gun.

The more you have invested in a crop, the more you need to protect it, and insect screening not only provides a good insect barrier but a level of security that all is well with your crop. Insect screening is another consideration for growers looking for crop protection and peace of mind.

Neil is a horticulturist and owner of Green Industry Marketing. This article first appeared in sister publication, Greenhouse Management magazine.